Log a board climb

Log a Kilter, Moon or Tension board problem by name, with its angle and grade.

iPhoneAndroid

Board climbs are named problems, so Crux asks for the name, the board and its angle as well as the grade.

Steps

  1. Tap the + in the middle of the tab bar, then Board. It opens on the board and angle you last used, so usually you only need the name and grade.

  2. Under Board type, pick Kilter Board, Moon Board, Tension Board or Other.

    Tapping + then Board, then picking Kilter Board

  3. Set the Board angle and the Grade, then type the Boulder name.

    Setting the angle and grade, then typing the boulder name

  4. Set Goes, then Slide to tick if you sent it, or tap Log without sending.

    Sliding to tick the climb

The setter, a photo or video, effort, a rating, holds, moves and notes are under More detail, below the slide. Where you’re climbing shows as a chip at the top of the form; tap it to change it.

What you’ll see

Once you type a name you’ve logged before, Crux shows what happened last time on that problem. Terrain is filled in from the angle: a board at 0° counts as vertical, anything steeper as overhang.

You can also give the problem a Rating out of five, which is your opinion of the problem, not how hard it felt. How hard it felt goes under effort.

If it doesn’t work

  • It won’t save. Board climbs need a name. Type one, even a short one.

Last checked 19 November 2026.

Still stuck?

In the app, open Settings, then Help and support, and tap New request. Or email support@cruxlog.app with what happened, your phone and the date of the session.